刁蛮女子的UU生活日志

Household and similar electrical appliances-Safety-

Part 1:  General requirements

Household and similar electrical appliances-Safety-

Part 2-12:  Particular requirements for warming plates and similar appliances

Household and similar electrical appliances-Safety-

Part 2-29:  Particular requirements for battery chargers

Household and similar electrical appliances-Safety-

Part 2-75:  Particular requirements for commercial dispensing appliances and vending machines

Household and similar electrical appliances-Safety-

Part 2-82:  Particular requirements for amusement machines and personal service machines

Electromagnetic compatibility (EMC)-

Part 2-12:  Environment-Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems

Electromagnetic compatibility (EMC)-

Part 3-2:  Limits-Limits for harmonic current emissions (equipment input current≤16 A per phase

Electromagnetic compatibility (EMC)-

Part 3-4:  Limits-Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A

Electromagnetic compatibility (EMC)-

Part 4-2:  Testing and measurement techniques-Electrostic discharge immunity test

Electromagnetic compatibility (EMC)-

Part 4-6:  Testing and measurement techniques-Immunity to conducted disturbances,induced by radio-frequency fields

Electromagnetic compatibility (EMC)-

Part 4-8:  Testing and measurement techniques-Power frequency magnetic field immunity test

Electromagnetic compatibility (EMC)-

Part 4-9:  Testing and measurement techniques-Pulse magnetic field immunity test

Electromagnetic compatibility (EMC)-

Part 4-11:  Testing and measurement techniques-Voltage dips,short interruptions and voltage variations immunity tests

Electromagnetic compatibility (EMC)-

Part 4-17:  Testing ans measurement techniques-Ripple on d.c.input power port immunity test

Electromagnetic compatibility (EMC)-

Part 4-28:  Testing and measurement  techniques-Variation of power frequency,immunity test

Electromagnetic compatibility (EMC)-

Part 5-7:  Installation and mitigation guidelines-Degrees of protection provided by enclosures against electromagnetic disturbances  (EM code)

Electromagnetic compatibility (EMC)-

Part 6-2:  Generic standards-Immunity for industrial environments

Electromagnetic compatibility (EMC)-

Part 6-6:  Generic standards-HEMP immunity for indoor equipment

Protection of persons and equipment by enclosures – Probes for verification

Loading guide for dry-type power transformers

Cylindrical shaft ends

Mechanical properties of fasteners made of carbon steel and alloy steel-

Part 1:  Bolts,screws and studs

Flat head bolts

Hexagon head bolts and hexagon head screws

Hexagon nuts and hexagon thin nuts

Rolling bearings-Designation

Helical compression and extension springs-Requirements for design, performance test method

Vending machines - Installation

Sound Level Meters

Acoustics-Description and measurement of environmental noise